Wall painting might seem simple and straightforward. However, the steps and terminologies used may be complicated. It is not as simple as choosing the right paint colour. We will discuss how wall paintings are typically done.

Starting off

Prepping your walls before painting is really important as it will produce a better finish. If you are planning to paint an old surface, start off by removing old paint or chips by using a scraper. Patch off any holes or cracks and using sandpaper to smooth down the wall. Once completed, masking or sealing off any unpainted area to prevent unwanted stains as well as covering your furniture with plastic sheets. You do not want to damage any of your precious furniture!

Priming (Basecoat)

Priming your walls prior to painting will provide good adhesion between the wall and paint. A primer acts as a magnet for the wall and paint. This will result in paint to last longer. Primer also covers stains from bleeding into the paint. Without a primer, you are required to paint more layers of finish coat which will cost more money. A primer also protects the paint from moisture and smooth out the surface. A substitute for Primer is the Sealer paint. Like Primer, it gives a good adhesion between wall and new paint and other similar benefits as Primer. The key difference is Sealer is more suitable for a porous wall surface.

Finish Coat

After leaving the Basecoat to dry, it is time to paint your wall. You do not want to have uneven layers of paint on your wall. Make sure that you stir your paint regularly for an even and smooth finish. Even out the paint on your roller before applying it to the wall. Roll the paint in a “zig-zag” pattern to get more coverage. Typically, 2 or 3 layers of paint will be sufficient.